Simultaneous isolation and determination of esculin and rutin in natural materials using SPE and HPLC

Summary Esculin (ESC) and rutin (RUT) have been simultaneously isolated from pharmaceutical natural materials by solid phase extraction (SPE). Determination of both substances was performed by reversed phase high performance liquid chromatography (RPHPLC) with UV detection. Optimization of the separation conditions showed that simultaneous isolation and determination of rutin and esculin from pharmaceutical material was possible. The recovery obtained was not lower than 95±2%.     

Homolytic Cyclizations of N-Chloroalkenylamines

Many N-chloroalkylamines with double bond(s) dissociate homolytically to give chlorine atoms and aminyl radicals which undergo intramolecular cyclization reactions. Here, the nature of the aminyl radicals (neutral, protonated, or complexed to metal salts) appears to be important. The reactivity varies strongly from one species to another, and their selectivities can be different towards addition, substitution, abstraction, or dimerization reactions. A good synthetic tool appears to be the “complexed radical”, which is generated under mild conditions. A variety of β-functionalized, substituted, fused, or bridged azaheterocycles with alkaloid part structures thus become easily accessible in high yields, in a regio- and, possibly, stereoselective manner. Many examples are discussed illustrating the synthetic possibilities, limitations, and mechanistic features of this cyclization process.     

阴离子交换固相萃取-气相色谱/质谱法分析人血浆中6种神经性毒剂降解产物

采用醋酸汞去除蛋白,实现了阴离子交换固相萃取-气相色谱/质谱法同时测定人血浆中6种神经性毒剂降解产物的三甲基硅烷衍生物。考察了不同溶剂的去蛋白效率和不同固相萃取柱对毒剂降解产物的保留行为,优化了阴离子交换树脂的洗脱条件。采用选择离子监测方式,6种降解产物在0.05~5.0 mg/L范围内呈良好的线性关系,最低检出限在22μg/L以内;RSD均小于9.7%。该方法检测灵敏度高,血浆样品干扰小,是一种理想的血浆中神经性毒剂降解产物的检测方法。     

Solid-phase microextraction for qualitative and quantitative determination of migrated degradation products of antioxidants in an organic aqueous solution

Low molecular weight aromatic substances may migrate out from plastic packaging to their contents, especially if they consist of organic aqueous solutions or oils. It is, therefore, extremely important to be able to identify and quantify any migrated substances in such solutions, even at very low concentrations. We have in this work investigated and evaluated the use of solid-phase microextraction for the specific task of extraction from an organic aqueous solution such as a simulated pharmaceutical solution consisting of 10 vol.% ethanol in water. The goal was furthermore to investigate the possibility of simultaneously identifying and quantifying the substances in spite of differences in their chemical structures. Methods were developed and evaluated for extraction both with direct sampling and with headspace sampling. Difficulties appeared due to the ethanol in the solution and the minute amounts of substances present. We have shown that a simultaneous quantification of migrated low molecular weight degradation products of antioxidants using only one fibre is possible if the extraction method and temperature are adjusted in relation to the concentration levels of the analytes. Comparions were made with solid-phase extraction.     

环境友好助洗剂——4A沸石

介绍了4A沸石的结构、性质及其作为洗涤助剂等方面的应用和国内外发展状况。     

Capillary electrophoretic determination of lignin degradation products obtained by permanganate oxidation

A new capillary electrophoretic (CE) technique was developed for the separation of lignin degradation products after permanganate oxidation, yielding information about quality and quantity of various linkages in the lignin molecule. This CE method is a promising alternative to existing gas chromatographic (GC) methods. An advantage in comparison with GC is the short separation time and the fact that the oxidation products (aromatic acids) can be analyzed without derivatization. The selectivity and sensitivity of CE combined with UV detection is adequate and makes it suited for fast routine characterization of lignins. If necessary, the CE method can be coupled with electrospray ionization mass spectrometry in order to make a clear assignment of the peaks.     

Physico-chemical aspects of polyethylene processing in an open mixer. Part 24: Experimental kinetics of aldehyde and carboxylic acid formation

The experimental kinetics for carboxylic acids shows more complexity than that for ketones. The fitting of the experimental results for the initial stages to the equation consisting of a linear and a quadratic term in processing time accounts well for the ketone data but not for the acid data. Instead of that, the data for the acids show fair fit to an equation containing a linear term and another term that is cubic in processing time. In the temperature range of the experiments the linear term is practically constant. The cubic term increases strongly with temperature. The combination of a linear and a quadratic term can account for the advanced stages of processing. The corresponding quadratic term shows strong increase if the processing temperature passes from 150 to 160 °C. However, for higher processing temperatures it remains constant within experimental error. The difference carbonyl absorbance measured after treatment of the polyethylene films with ammonia corresponds to the sum of the acids and aldehydes. It shows similarly complex kinetics. Some of the difficulties encountered with the experimental kinetics cannot be resolved with the data available. It is only the comparison with the formal kinetics based on potential mechanisms of product formation that allows for better understanding of the experimental results.     

Thermal decomposition products of copoly(arylene ether sulfone)s characterized by direct pyrolysis mass spectrometry

Pyrolysis products with mass of up to 850 Da were detected by direct pyrolysis mass spectrometric (DPMS) analysis of a series of copoly(arylene ether sulfone)s (PES-PPO) synthesized by nucleophilic condensation of either 4,4′-dichlorodiphenylsulfone (CDPS) or 4,4′-bis-(4-chlorophenyl sulfonyl) biphenyl (long chain dichloride, LCDC) with different molar ratios of hydroquinone (HQ) or dihydroxydiphenylsulfone (HDPS). Pyrolysis products retaining the repeating units of the initial copolymers were formed at temperatures ranging from 420 °C to 470 °C (near the initial decomposition temperature). At temperatures higher than 450 °C were observed products containing biphenyl units, formed by the elimination process of SO₂ from diphenyl sulfone bridges. Products having biphenyl and dibenzofuran moieties were detected in the mass spectra recorded at temperatures above 550 °C. These units were formed by loss of hydrogen atom from diphenyl ether bridges. Although the EI (18 eV) mass spectra of the pyrolysis products of the samples investigated were very similar, it was found that the relative intensity of some ions reflects the molar composition of the copolymers analysed. Cyclic and linear oligomers with very low molecular mass, present in the crude copolymers, were also detected by DPMS. Thermogravimetric analysis also showed their excellent thermal stability below 400 °C. It indicates that the copolymers yield a char residue of 40-45% at 800 °C, which increases with the PPO mole fraction in the samples.     

Structure and Reactivity of Lithium Enolates. From Pinacolone to Selective C-Alkylations of Peptides. Difficulties and Opportunities Afforded by Complex Structures

The chemistry of lithium enolates is used to demonstrate that complex structures held together by noncovalent bonds (“supramolecules”) may dramatically influence the result of seemingly simple standard reactions of organic synthesis. Detailed structural data have been obtained by crystallographic investigations of numerous Li enolates and analogous derivatives. The most remarkable features of these structures are aggregation to give dimers, tetramers, and higher oligomers, complexation of the metal centers by solvent molecules and chelating ligands, and hydrogen-bond formation of weak acids such as secondary amines with the anionoid part of the enolates. The presence in nonpolar solvents of the same supramolecules has been established by NMR-spectroscopic, by osmometric, and by calorimetric measurements. The structures and the order of magnitude of the interactions have also been reproduced by ab-initio calculations. Most importantly, supramolecules may be product-forming species in synthetic reactions of Li enolates. A knowledge of the complex structures of Li enolates also improves our understanding of their reactivity. Thus, simple procedures have been developed to avoid complications caused by secondary amines, formed concomitantly with Li enolates by the common methods. Mixtures of achiral Li enolates and chiral Li amides can give rise to enantioselective reactions. Solubilization by LiX is observed, especially of multiply lithiated compounds. This effect is exploited for alkylations of N-methylglycine (sarcosine) CH₂ groups in open-chain oligopeptides. Thus, the cyclic undecapeptide cyclosporine, a potent immunosuppressant, is converted into a THF-soluble hexalithio derivative (without epimerization of stereogenic centers) and alkylated by a variety of electrophiles in the presence of either excess lithiumdiisopropyl amide or of up to 30 equivalents of lithium chloride. Depending on the nature of the LiX additive, a new stereogenic center of (R) or (S) configuration is created in the peptide chain by this process. A structure-activity correlation in the series of cyclosporine derivatives thus available is discussed.